Volkswagen Passat 1995 Official Factory Repair Manual page 3105

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Drive pinion, removing
and installing
Note:
To remove the drive pinion, the
selector shaft must be removed
after taking out the parking lock
page 38-31 , Parking lock,
disassembling and assembling.
1 - Drive pinion
Number of teeth
from page 00-3
Technical data
Adjusting page 39-
44
Removing
2 - Transmission housing
3 - Screw
Tightening torque: 12
Nm (9 ft lb)
Remove screw before
removing or installing
bearing supporting ring
- 12 -
Install with
AKD45600001 sealing
compound
Page 9 of 35
39-14
,
Fig. 8
12/6/2004