Volkswagen Passat 1995 Official Factory Repair Manual page 3114

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Page 18 of 35
Differential, removing and
installing
Note:
If tapered roller bearings
are to be re-used, mark the
adjusting ring Fig. 2
The drive pinion does not
need to be removed for
removing and installing the
differential.
1 - Transmission housing
2 - Speedometer drive
With marking for oil
level indication
7
3 - Output shaft/drive
flange
Install thread facing
drive flange
Remove before taking
out differential
First adjust differential
before installing
4 - O-ring
Always replace
39-23
Fig.
12/6/2004