Volkswagen Passat 1995 Official Factory Repair Manual page 2722

Planetary transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.13
- Before removing free wheel remove
Transmission Vehicle Sensor (VSS) -G38-
Page 01-18 , Fig. 10
- Remove supporting tube circlip -a- and free wheel
circlip -b-.
- Take free wheel out of housing by pulling on free
wheel retaining wedge (arrow) with pliers.
- Pull out planet carrier with dished spring.
- Remove reverse gear brake -B1- plates.
Note:
It is not necessary to remove input gear to
disassemble planetary transmission. Removing
and installing input gear
Assembling planetary transmission
78 .
Page 7 of 16
37-77
Page 39-8 .
Page 37-
12/6/2004