Volkswagen Passat 1995 Official Factory Repair Manual page 2986

Transmission, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.3
- Turn steering to right lock.
- Raise right axle shaft and secure.
- Mark installation position of ball joint bolts on left
side control arm and remove bolts.
- Vehicles with Plus suspension, remove bolts -A-
and loosen bolts -B-.
- Swing ball joint outward and place left side axle
shaft to one side.
- Vehicles with tripodic (star-shaped) joint: remove
drive shaft.
Repair manual, Suspension, Wheels, Brakes,
Steering, Repair Group 40.
- Disconnect harness connector from Multi-function
Transmission Range (TR) Switch and remove
switch.
- Remove ATF oil pan protective plate.
Page 4 of 9
37-37
12/6/2004