Valve body, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.38.6
Fig. 3
Conductor strip, removing
- Place 3373 onto stop under solenoid valve plug.
- Pull plug off with 3373 in direction of (arrow).
- Remove bolt -1-.
Fig. 4
Valve body, removing and unhooking
operating rod
When removing the valve body the manual selector
valve -1- remains in valve body.
- Pull manual selector valve out until it is just
possible to unhook operating rod -2-.
- Secure manual selector valve so that it cannot fall
out.
Page 6 of 9
38-25
12/6/2004