Volkswagen Passat 1995 Official Factory Repair Manual page 3235

Teves 20 GI ABS and ABS/EDL warning lights, malfunctions displayed
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.7
Teves 20 GI ABS and
ABS/EDL warning lights,
malfunctions displayed
ABS warning light -K47- (-2-) does not go out after
completion of self-test sequence (ignition
switched on)
Possible malfunctions are:
Battery positive voltage (B+) supply is below 10
volts
Malfunction in ABS
Sensor malfunction after last starting the vehicle
(sporadic)
Open circuit between the ABS warning light
module, terminal 1, and the ABS control module,
terminal 16
ABS warning light module faulty
With an ABS malfunction, the anti-lock brake system
remains switched off, but the conventional braking
system remains fully functional.
In the case of sensor malfunction, the ABS warning
light will go out after restarting the engine and
reaching a speed in excess of 20 km/h (12 mph).
Page 1 of 2
01-87
12/7/2004