Volkswagen Passat 1995 Official Factory Repair Manual page 3093

Drive flange oil seal, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.2
Drive flange oil seal, removing
and installing
(Transmission installed)
- Disconnect drive shaft from drive flange.
When replacing right-hand oil seal:
- Remove balance weight.
- Lay drive shaft to one side and secure.
When replacing left-hand oil seal:
- Mark installation position of ball joint/control arm
mounting bolts and:
- Remove outer bolts (arrow -A-).
- Loosen inner bolt (arrow -B-).
- Turn steering to right, full lock.
- Swing ball joint out and place left-hand drive shaft
to one side.
Page 1 of 4
39-2
12/6/2004