Volkswagen Passat 1995 Official Factory Repair Manual page 2803

Final drive oil level, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.1
- Pull off drive flange for tripodic drive shaft.
- Bolt puller Kukko 18-0 using two 8x35 mm bolts
and 8 mm diameter washers to flange.
- Pull out drive flange oil seal with VW681
- Pull new oil seal in up to stop with press piece
3319, M10 threaded rod (approx. 80 mm or 3 1/4
in. long) and nut with washer.
- Fill space between seal and dust lip with multi-
purpose grease.
Page 4 of 5
39-4
12/6/2004