Volkswagen Passat 1995 Official Factory Repair Manual page 2730

Planetary transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.13
- Install -B2- plates as follows:
- First install a 3 mm thick outer plate
- Install three spring caps in outer plate
- Install compression springs (arrows)
- Install all but the last outer plate
- Before installing the last (measured) outer plate,
place three spring caps onto compression springs.
- Replace corrugated washer.
Note:
When replacing
Supporting tube
ATF pump
or plates
the 2nd and 4th gear brakes -B2- are to be adjusted,
Page 37-113 .
Page 15 of 16
37-85
12/6/2004