Volkswagen Passat 1995 Official Factory Repair Manual page 2968

Shift mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.1
Fig. 3 Adjusting clearance between push rod
and lever
Dimension -a- 0.3 mm (0.019 in.)
Functional check
- Shift selector lever into position "P" and supply
Shiftlock Solenoid -N110- with 12 Volts.
It must not be possible to shift selector lever
into a driving gear.
- Interrupt solenoid operation.
It must now be possible to shift into driving
gears.
Push rod must not catch on lever.
- Shift selector lever into "N" and check as in "P."
- After adjusting clearance, install assembled
selector lever.
Page 19 of 25
37-19
12/6/2004