Volkswagen Passat 1995 Official Factory Repair Manual page 2808

Input gear, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.3
Page 2 of 5
4 - Tapered roller bearing
inner race
After measuring
thickness of shim,
install on input gear
with locking fluid AMV
185 101 A1 Fig. 3
5 - Tapered roller bearing
outer race
Drive out with drift
Drive in with 30-205
Insert with locking fluid
AMV 185 101 A1
6 - Transmission housing
7 - Axial needle bearing
Install with flat side
facing input gear
Insert into input gear
before installing
socket-head fastener
(item 1 )
39-9
12/6/2004