Volkswagen Passat 1995 Official Factory Repair Manual page 3133

Final drive, adjusting
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.4
Page 2 of 12
6 - Shim for differential
7 - Tapered roller bearings
for input gear
Always replace
together
Measure friction torque
via pinion shaft.
Friction torque of new
tapered roller bearings
must be 180-220 Ncm
(16-20 in lb) greater
than friction torque of
pinion shaft
8 - Tapered roller bearings
for drive pinion
Always replace
together
Re-determine correct
shim thickness when
replacing tapered roller
bearings
9 - Tapered roller bearings
for differential
Always replace
together
Measure friction torque
via pinion shaft.
Friction torque of new
tapered roller bearings
must be 60-80 Ncm (5-
7 in lb) greater than
friction torque of pinion
shaft
39-42
12/6/2004