Volkswagen Passat 1995 Official Factory Repair Manual page 2960

Shift mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.1
Fig. 1 Removing and installing selector lever
housing
- Remove rear center console.
- Remove hex nut with shoulder.
- Remove lower protective plate.
- Disconnect Oxygen Sensor connector, separate
exhaust system in front of Three Way Catalytic
Converter (TWC).
Note:
On vehicles with 6-cyl. engine, remove the Three
Way Catalytic Converter (TWC) completely.
- Remove front protective plate and rear lower bolts
(arrows).
Fig. 2 Mounting wiring harness to selector
lever housing
- Press wiring harness into clips and into selector
lever housing (arrows).
Page 11 of 25
37-11
12/6/2004