Volkswagen Passat 1995 Official Factory Repair Manual page 3071

Reverse gear clutch -K2-, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.38.4
Fig. 1 Removing and installing circlip
Removing
- Carefully press down spring supporting plate (do
not bend) and spread circlip (arrow).
Installing
- Install new circlip and carefully press down with
spring supporting plate. Plate must be centered
relative to hub, otherwise spring supporting plate
will be bent.
Fig. 2 Installation position of spring
supporting plate, checking circlip
Circlip (arrow) must be seated in the groove of
clutch housing.
Spring supporting plate must be centered
relative to hub.
Page 4 of 4
38-16
12/6/2004