Volkswagen Passat 1995 Official Factory Repair Manual page 2807

Input gear, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.39.3
Input gear,
removing and
installing
Note:
Drive pinion and differential do
not need to be removed.
1 - Socket-head fastener,
250 Nm (184 ft lb)
Engage parking lock to
remove and install
Use 22 mm hex socket
Before installing
socket-head fastener
insert axial needle
bearing (item 7 )
2 - Dished washer
Curved side faces
socket-head fastener
3 - Shim
Determining thickness
Adjusting input
gear, Page 39-46
Page 1 of 5
39-8
12/6/2004