Volkswagen Passat 1995 Official Factory Repair Manual page 2992

ATF level
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.4
ATF level
ATF level, checking
Checking conditions
When checking ATF level the transmission
must not be in emergency running mode.
Vehicle parked on level surface, parking
brake applied
Selector lever at "P" and engine running at
idle speed
When cold, the ATF should be visible up to the
20 C marking
Bring ATF up to normal operating temperature -
approx. 60 C (140 F)
Operating temperature is measured with VAG
1551 Scan Tool (ST)
measured value block. Check ATF level again and
top up or extract as necessary.
It is essential that the ATF level is between the
Min. and Max. markings.
CAUTION!
Too much or too little ATF will affect the
operation of the transmission. The ATF level must
therefore be checked at regular intervals.
Page 1 of 2
page 01-40 , Reading
12/6/2004
37-43