Transmission, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.3
Installing
Installation is carried out in the reverse order.
When installing the torque converter, ensure that
both drive pins engage in the ATF pump inner
wheel recesses.
- Before installing, ensure that dowel sleeves for
aligning the engine and transmission are
correctly located.
- Replace selector cable anchor locking
washer.
- Check selector lever cable adjustment, adjust if
necessary
page 37-3
Page 8 of 9
.
12/6/2004
37-41