Volkswagen Passat 1995 Official Factory Repair Manual page 3441

Rear drive shafts, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.SU01.42.4
- Cut new thread in the cap nut, M 12 x 1.5.
- Use new bolts, Part No. N 010 137.1 and
washer, Part No. N 011 531.7 to secure the rear
axle.
Tightening torque: 65 Nm (48 ft lb)
Note:
The procedure described here must only be
performed on one cap nut on each side of the
vehicle.
Page 7 of 7
42-52
12/7/2004