Volkswagen Passat 1995 Official Factory Repair Manual page 3124

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Page 28 of 35
Differential,
disassembling and
assembling
Note:
Heat tapered roller bearing
inner race to 100 C (212
F) before pressing on.
Heat adjusting ring for
tapered roller bearing to
100 C (212 F) before
pressing in tapered roller
bearing outer race.
1 - Differential housing
with riveted gear for
final drive
Final drive gear is
riveted onto differential
housing and then
machined
If differential or final
drive gear is damaged,
replace differential
housing along with
riveted final drive gear
Number of teeth on
final drive gear
page 00-3 , Technical
data
2 - Output shaft/drive
flange
Removing and
installing page 39-
23
39-33
from
12/6/2004