Volkswagen Passat 1995 Official Factory Repair Manual page 3085

Valve body, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.38.6
Installing
- Route conductor strip as shown; do not kink or
twist.
- Press gasket into ATF screen before installing
screen.
- Replace ATF pan gasket.
Clip bushing into gasket.
Tightening torques
Conductor strip to trans.
housing
ATF screen to valve body
ATF pan to trans. housing
- Add 3 liters (3.2 US qt.) ATF, check ATF level, and
top up as necessary
Page 9 of 9
10 (7 ft lb)
Nm
8 Nm
12 (9 ft lb)
Nm
page 37-43 .
12/6/2004
38-30
(71 in.
lb)