Volkswagen Passat 1995 Official Factory Repair Manual page 3107

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Page 11 of 35
10 - Shim
Determining thickness
page 39-44
pinion, adjusting
11 - Parking lock gear
Rounded side faces
teeth of drive pinion
12 - Bearing support ring
Tightening torque: 200
Nm (148 ft lb)
Remove screw - 3 -
before removing or
installing bearing
support ring
Removing or installing
Fig. 5
Bearing support ring
cannot be unscrewed
until the selector shaft
has been removed
page 38-31 , Parking
lock, disassembling
and assembling
Install bearing
supporting ring
carefully. Sealing lip
and spring must not be
damaged.
Supporting ring with
seal Fig. 6
39-16
, Drive
12/6/2004