Volkswagen Passat 1995 Official Factory Repair Manual page 3186

Teves 04 ABS and ABS/EDL On Board Diagnostic (OBD)
Attention!
DTC Memory is not interrogated
Rapid data transfer
Select function XX
Rapid data transfer
06 - End Output
Rapid data transfer
Insert address word XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.3
HELP
Q
HELP
Note:
If "DTC Memory is not interrogated" is displayed,
the OBD test sequence is faulty.
Follow the program sequence exactly: first check
DTC memory, then erase.
Ending output
Indicated on display (clear for function selection)
- Press buttons -0- and -6- to select "End Output"
function 06.
Indicated on display
- Press -Q- button to confirm input.
Indicated on display
- Switch ignition off.
- Disconnect VAG 1551 scan tool.
- Switch ignition on.
ABS warning light -K47- must come on, then go
out after approx. 2 seconds.
Page 24 of 24
01-38
12/7/2004