Volkswagen Passat 1995 Official Factory Repair Manual page 2778

Reverse gear clutch -K2-, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.38.4
Fig. 1 Circlip (arrow), removing and installing
- Press spring supporting plate down with 3267
enough so that circlip can be removed and
installed.
Note:
Do not damage clutch housing ball valve.
Fig. 2 Spring supporting plate/circlip,
installation position
Circlip (arrow) must be seated in the groove of clutch
housing. Spring supporting plate must be centered
relative to hub.
Page 3 of 3
38-14
12/6/2004