Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD)
Diagnostic Trouble Code (DTC) table
VAG 1551 Scan Tool
printout
00000
No DTC recognized
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.8
Possible cause of malfunction
If "No DTC recognized" is displayed after carrying out repairs, On Board
Diagnostic (OBD) program sequence has ended.
If, despite "No DTC recognized" being displayed, the ABS system does not
operate properly, then proceed as follows:
1. Carry out road test exceeding 20 km/h (12 mph).
2. Again check DTC memory.
If there is still no DTC stored:
3. Troubleshoot without On Board Diagnostic (OBD) and work through the
complete electrical test
page 01-129
.
Page 9 of 40
Repairing malfunction
01-97
12/7/2004