Volkswagen Passat 1995 Official Factory Repair Manual page 2958

Shift mechanism, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.37.1
Page 9 of 25
18 - Selector lever cable
To remove selector
lever, lower protective
plate is removed,
exhaust system is
separated in front of
Three Way Catalytic
Converter (TWC) and
front protective plate
removed (vehicles with
6-cyl. engine: remove
TWC)
Do not bend or kink
Lightly grease cable
eye and cable ends
before installing
Tighten selector lever
cable on cable
anchor/selector lever
housing to 20 Nm (15
ft lb)
Check guide tube for
tight fit
Check protective
sleeve between
console and
lever/gearshift shaft for
proper seating and
secure selector lever
cable with corrugated
locking element -28-
Attach selector lever
cable to selector lever
Fig. 3
Adjusting page 37-3
37-9
12/6/2004