Volkswagen Passat 1995 Official Factory Repair Manual page 3099

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Input gear, removing and
installing
Note:
Drive pinion and differential do
not need to be removed.
1 - Socket-head fastener
Tightening torque: 250
Nm (184 ft lb)
Engage parking lock to
remove and install
Use 22 mm hex
wrench
Before installing
socket head fastener
insert axial needle
bearing - 7 -
2 - Dished washer
Curved side faces
socket head fastener
3 - Shim
Determining thickness
page 39-48
gear, adjusting
Page 3 of 35
39-8
, Input
12/6/2004