Volkswagen Passat 1995 Official Factory Repair Manual page 2782

4th gear clutch -K3- with turbine shaft, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.38.5
Fig. 1 Circlip (arrow), removing and installing
- Press down carefully on piston cap until circlip can
be installed.
Fig. 2 Seating of piston rings, checking
A piston ring is installed on the pump shaft inside the
clutch housing (arrow).
- Ensure that ends of piston rings are hooked
together.
Page 4 of 5
38-18
12/6/2004