Volkswagen Passat 1995 Official Factory Repair Manual page 2791

Valve body, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.38.6
Fig. 7 Operating rod, unhooking from manual
selector valve
- Turn manual selector valve -1- so that shoulder is
to operating rod.
- Guide operating rod -2- with manual selector valve
into valve body.
Fig. 8 Operating rod for manual selector
valve, adjusting
- Move selector shaft to position "P".
- Push operating rod with manual selector valve into
valve body up to stop (direction of arrow) and
tighten bolt to 4 Nm (35 in. Ib).
Note:
Manual selector valve must always be resting
against the stop. Counter-hold in direction of
(arrow) when tightening bolt.
Always replace bolt and manual selector valve
retaining clip.
Page 8 of 9
38-27
12/6/2004