Volkswagen Passat 1995 Official Factory Repair Manual page 3063

1st to 3rd gear clutch -K1- with turbine shaft, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.38.3
6 - Outer plate
Quantity page 00-3
Installing Fig. 2
Always 1.5 mm thick
7 - Outer plate
Always 2 mm thick
Installing Fig. 2
8 - Corrugated washer
9 - Circlip
Removing and
installing Fig. 1
10 - Piston cap
Sealing lips are
vulcanized to cap
Moisten sealing lips
with ATF before
installing
Turn cap slightly while
installing
11 - Intermediate spring
ring
With spring supporting
shell and compression
springs
Page 2 of 6
38-8
12/6/2004