Volkswagen Passat 1995 Official Factory Repair Manual page 2727

Planetary transmission, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.37.13
- Install small drive shaft bolt -1- with washer -2- and
shim -3-
Tightening torque: 30 Nm (22 ft lb)
Note:
Install shim -3- onto small drive shaft shoulder
(arrow).
Determining shim thickness, adjusting planet
carrier, Page 37-91
- Perform planet carrier check measurement
Page 37-98
- Install axial needle bearing with washer on 4th
gear clutch -K3-.
1 - Axial needle bearing with washer
Moisten axial needle bearing washer with ATF so
that bearing, when installed, sticks to -K3-. Install
bearing washer on-K3-.
2 - 4th gear clutch -K3-
Page 12 of 16
.
12/6/2004
37-82