Volkswagen Passat 1995 Official Factory Repair Manual page 3111

Final drive, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.3
Fig. 5 Removing and installing bearing
supporting ring
A - Torque wrench
- Tighten bearing supporting ring.
Tightening torque: 200 Nm (148 ft lb)
- Secure with locking screw. Install screw with
thread sealing compound AKD45600001.
Fig. 6 Bearing supporting ring with seal for
drive pinion
Installation position of seal:
Open side (arrow) faces toward tapered roller
bearing outer race
Page 15 of 35
39-20
12/6/2004