Volkswagen Passat 1995 Official Factory Repair Manual page 3096

Drive flange oil seal, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.39.2
- Install circlip and seal drive flange with cover.
- Install drive shaft.
- Reconnect ball joint to control arm.
- With transmission installed, check final drive oil
level page 39-1
Tightening torque:
Drive shaft to drive flange 45 Nm (33 ft lb)
Ball joint to control arm
.
35 Nm (26 ft lb)
Page 4 of 4
39-5
12/6/2004