Volkswagen Passat 1995 Official Factory Repair Manual page 2783

4th gear clutch -K3- with turbine shaft, disassembling and assembling
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT01.38.5
Fig. 3 Piston rings, installing and hooking
ends together
- Place piston ring in groove.
- Press sides of ring in and guide ends over one
another.
Note:
Do not twist piston ring out of groove on one side.
Fig. 4 O-ring, installing
- Insert O-ring in recess in turbine shaft (arrow).
Page 5 of 5
38-19
12/6/2004