Volkswagen Passat 1995 Official Factory Repair Manual page 3291

Teves 20 GI ABS and ABS/EDL electrical test
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.9
Installing:
CAUTION!
Only remove the sealing plugs on the ABS
hydraulic unit just before the particular brake
line is to be installed.
If the sealing plugs are removed too soon,
brake fluid can escape and it can then no
longer be guaranteed that the unit is
sufficiently filled or adequately bled.
There must not be anything in the area of the
ABS control module that can contaminate
the valve block.
- Bolt ABS control module to ABS hydraulic
unit.
Maximum tightening torque: 4 Nm (35 in lb)
- Connect ABS hydraulic pump motor harness
connector.
The remainder of the installation is the reverse of
the removal sequence.
Bleeding brake system
Repair Manual, Suspension, Wheels, Brakes,
Steering, Repair Group 47
Coding ABS control module
Page 15 of 17
.
page 01-105 .
12/7/2004
01-143