Volkswagen Passat 1995 Official Factory Repair Manual page 3244

Teves 20 GI ABS and ABS/EDL On Board Diagnostic (OBD)
Diagnostic Trouble Code (DTC) table
Notes on DTC table:
All the possible malfunctions that can be recognized by the ABS control module -J104- and printed
out on the VAG 1551 scan tool are listed on the following pages according to the 5-digit Diagnostic
Trouble Code (DTC).
Diagnostic Trouble Codes (DTC) appear only on the print-out (in "Rapid data transfer" mode).
Example:
Diagnostic Trouble Code (DTC)
5 digit
00277
In addition, the type of malfunction may also appear in the Diagnostic Trouble Code (DTC) table.
Reference is made to individual test steps of the electrical test in the "Repairing malfunction" column.
Before replacing components indicated as being faulty, check all appropriate wiring, harness
connectors and Ground (GND) connections according to the wiring diagram.
After repairs, always check and erase DTC memory again using the VAG 1551 scan tool, also carry
out a road test during which the vehicle exceeds a speed of 20 km/h (12 mph).
Repeat the On Board Diagnostic (OBD) procedure after the road test.
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.OB01.01.8
Page 8 of 40
01-96
12/7/2004