Volkswagen Passat 1995 Official Factory Repair Manual page 3082

Valve body, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW.B4.AT02.38.6
Fig. 3 Adjusting operating rod for manual
selector valve
- Move selector shaft to position "P."
- Push operating rod with manual selector valve into
valve body as far as stop (in direction of arrow)
and tighten bolt.
Tightening torque: 4 Nm (35 in lb)
Note:
The manual selector valve must always be resting
against the stop. Counter-hold in direction of
arrow when tightening bolt.
Always replace manual selector valve bolt.
Page 6 of 9
38-27
12/6/2004