Avaya Definity SI Maintenance Manual page 292

Maintenance Commands and Trouble-Clearing Aids
MINIMUM MAINTENANCE THRESHOLDS ( Before Notification )
TTRs: 4
MMIs: 0
TERMINATING TRUNK TRANSMISSION TEST (Extension)
Test Type 100:
ISDN MAINTENANCE
ISDN-PRI TEST CALL Extension: _____
DS1 MAINTENANCE
DSO Loop-Around Test Call Extension: _____
SPE OPTIONAL BOARDS
Packet Intf1? y
Bus Bridge: ____
Field descriptions
SPE OPTIONAL BOARDS section
Packet
Intfl1
Packet
Intfl2
Bus Bridge
Inter-Boar
d Link
Timeslot
Pt0
Inter-Boar
d Link
Timeslot
Pt1
Inter-Boar
d Link
Timeslot
Pt2
8-42 Issue 4 May 2002
MAINTENANCE-RELATED SYSTEM PARAMETERS
CPTRs: 1 Call Classifier Ports: 0
VCs: 0
Test Type 102:
Packet Intf2? _
Inter-Board Link Timeslots Pt0: _
Identifies the presence of Packet Interface 1 (y for si).
Identifies the presence of Packet Interface 2 (y for si). Default is n.
The location of the C-LAN circuit pack performing the bus bridge
functionality when the packet bus is activated. Enter 5-character circuit
pack number (CCcss, where CC = cabinet number 1-3, c = carrier
A-E, ss = slot number 0-20). Default is blank.
The number of timeslots to be used for port 0 on the Inter-Board Link.
Displays only if the switch type is csi and the
y. Enter the number of timeslots (1-9) to be used by this Inter-Board
Link port. Default is 6.
The number of timeslots to be used for port 10 on the Inter-Board Link.
Displays only if switch model type is csi and the
field is y. Enter the number of timeslots (1-3) to be used by this
Inter-Board Link port. Default is 1.
The number of timeslots to be used for port 2 on the Inter-Board Link.
Displays only if switch model type is csi and the
field is y. Enter the number of timeslots (1-3) to be used by this
Inter-Board Link port. Default is 1.
Test Type 105:
ISDN BRI Service SPID: _____
Pt1: _
Packet Intf2
Packet Intf2
Packet Intf2
Page 2 of 3
Pt2: _
field is
555-233-123