Clear Port; Copy Update-File - Avaya Definity SI Maintenance Manual

clear port

clear port
This command removes maintenance marks from a port, freeing it for use.
Action/
Object Qualifier
clear port location

copy update-file

In Duplex systems only, this command copies update files from the active SPE to
the standby SPE. This command recovers field update ("patch") files that are
downloaded to the switch when the Standby SPE is unavailable. The switch
makes validation checks on the standby as it receives the file. If a newer, valid
update file exists on the standby, use the override option to force the copy.
Action/
Object Qualifier
copy override
update-file
Feature Interactions
The form display for the list configuration software-vintage command
allows INADS to determine the hardware configuration, software vintage,
and patch identifier.
Because patches are applied on restarts before the system is in normal
operation, no interaction with routine periodic or scheduled maintenance
exists.
The flash checksum test acts as a backup check to ensure entire field
update files are applied correctly. When the flash Checksum Test fails, a
MAJOR on-board alarm is raised on the processor/memory circuit pack.
Maintenance runs a data consistency test on a daily basis to check that
copies of translations, announcements, and software files are consistent
across both processors in a High or Critical Reliability System. If the test
detects a difference, a minor, off-board alarm is generated.
555-233-123
Qualifier Description
Port location (PCsspp)
Examples:
clear port 01c1102
Qualifier Description
Copies update files from
active to standby SPE,
regardless of the dates.
Examples:
copy update-file
copy update-file override
Feature
Logins Defaults Interactions
init none none
inads
cust
nms
Logins Defaults
init none
inads
Issue 4 May 2002
Feature
Interactions
See below
8-49