Avaya Definity SI Maintenance Manual page 218

Reliability Systems: A Maintenance Aid
Table 6-2. Software-Requested Interchanges Caused by Alarm Conditions
Maintenance
Object
STBY-SPE WARNING
MEM-BD MAJOR or MINOR
MEMORY MAJOR or MINOR
STBY-SPE MAJOR
PROCR MAJOR
SW-CTL MAJOR
MEM-CARD MAJOR
DUPINT MAJOR
CARR-POW MAJOR
SHDW-CIR MAJOR
SHDW-LINK MAJOR
SW-CTL MINOR
PR-MAINT MINOR
PI-BD MAJOR or MINOR
PKT-CTRL MAJOR
PKT-CTRL MINOR
PI-PT MAJOR
DATA-CHL MINOR
DATA-CON MINOR
DATA-BD MINOR
CARD-MEM MINOR
PR-MAINT MINOR
1 If the Standby SPE is in Standby mode when the alarm occurs, a Hot SPE-Interchange occurs. If
the Standby is in Maintenance mode when the alarm occurs, however, a Warm SPE-Interchange
rather than a Hot SPE-Interchange occurs.
Regardless of the condition that initiates an SPE-interchange, the G3MT is always
logged off as a result of the SPE-interchange. The G3MT is available to log into
after the SPE-interchange is complete and the "login" prompt is displayed.
6-14 Issue 4 May 2002
On/Off
Alarm Level Board
OFF
ON
ON
ON
ON
ON
OFF
ON
ON
ON or OFF
ON
ON
ON
ON
ON or OFF
ON or OFF
ON
ON
ON
ON
ON or OFF
OFF
Fault Severity
Level Restart Level
120 None
110 Hot or Warm
110 Hot or Warm
100 None
70 Hot or Warm
65 Cold 2
65 Cold 1
61 Hot
61 Cold 2
60 Warm
60 Warm
40 Hot
30 Hot
20 Hot
20 Hot
15 Hot
15 Hot
15 Hot
15 Hot
15 Hot
10 Hot
8 Hot
555-233-123
1
1
1