Option (Specification Setting Mode) - Canon imageRUNNER ADVANCE 715 series Service Manual

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > DBG-LOG
DEFAULT 2
Detail
Use Case
Adj/Set/Operate Method
LOG-DEL 2
Detail
Use Case
Adj/Set/Operate Method
HIT-STS2 2

OPTION (Specification setting mode)

■ FNC-SW
COPIER (Service mode for printer) > OPTION (Specification setting mode) > FNC-SW
MODEL-SZ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SCANSLCT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Reset of debug log setting
To clear all debug log settings and return to the state before debug log collection operation.
- When returning the device in which analyzing the cause of a problem was completed
- When resetting the debug log settings
Select the item, and then press OK key.
Clearing of debug logs
To delete the debug log file.
The debug log setting is not reset.
When clearing the debug log
Select the item, and then press OK key.
For R&D
Fixed magnifictn & DADF orgnl dtct size
To set the fixed magnification ratio display and the original detection size with DADF.
It is set automatically at the time of installation of the Reader according to the location.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: AB configuration (6R5E) for Japan, 1: Inch configuration (5R4E) for North/Middle/South
America, 2: A configuration (3R3E) for Europe, 3: AB/Inch configuration (6R5E) for Asia, Oceania,
South America
It differs according to the location.
ON/OFF of scan area calculate function
To set ON/OFF of the function to calculate scanning area from the specified paper size.
When the paper size is larger than the original size, selecting ON reduces productivity because
the scanning area gets larger.
When matching the scanning area with the paper size
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF (calculated from the detected original size)
1: ON (calculated from the specified paper size)
0
446
8. Service Mode