Table of Contents
Advertisement
CAUTION:
'300-ALL0' through '300-4:1' are not currently supported.
● DTMF Transmission Test
Of the items indicated below, press one; in response, the DC circuit will be closed and the selected DTMF signal will be transmitted
using the DTMF transmission function of the modem. You can also monitor the transmission signal by listening to the speaker.
To stop the operation and to end test mode, press the
Using Text Mode
1. From the items indicated on the screen, select the item you want to test; then, press the key on keypad that
corresponds to the DTMF signal to test.
CAUTION:
'SHORT' is not currently supported.
● V.34 G3 Signal Transmission Test (V34G3Tx)
Select the transmission speed you want to test, and then select a modulation speed (baud rate); in response, the V.34 G3
transmission signal will be transmitted to the telephone line terminal and the speaker. To stop the operation and to end test mode,
press the
key.
Sssw Menu Num Ncu Type IP FAX Print Clear
<MODEM>
<G3TX>
14400bps
300-ALL0
300-ALL1
300-1:1
300-1:4
300-4:1
key.
Sssw Menu Num Ncu Type IP FAX
<MODEM>
<DTMFTX>
LONG
0 1 2 3 4 5 6 7 8 9 * #
Test
Report
<READY>
<2/2>
OK
Print Clear
Test
<READY>
<1/1>
OK
578
8. Service Mode
Report
Advertisement
Table of Contents
