Canon imageRUNNER ADVANCE 715 series Service Manual page 565

Table of Contents

2. When the connected options (FEEDER, SORTER, FAX, BOARD) are displayed, select FAX and enter service mode

of this board.

COPIER: Service mode of the connected equipment

FEEDER: Service mode of the ADF (*)

SORTER: Service mode of the Finisher (*)

FAX: Service mode of the fax (*)

The following explains the operation method using the #1 SSSW screen as an example. The meaning of the keys and

operations are common for all screens.

• When changing the setting of the bit switch, directly press the bit (numeric value) you want to change.

• To enter a numeric value, use the numeric keypad.

• When confirming a change in a numeric value or when executing an item, press the [OK] key.

• To return to the previous layer, use the [Reset] key.

When changing the service mode settings, turn OFF and then ON the power.

The details of settings in service mode are stored in the HDD of the host machine. The settings for this board are enabled

by loading the settings stored in the HDD of the host machine to the G3 Fax Control PCB when the main power is turned

ON. Therefore, be sure to turn OFF and then ON the power when the settings have been changed.

Menu Num Ncu Type

Previous Page/Next Page key

Press to stop the TEST.

SERVICE MODE

Print Clear Test

Press to accept the current input.

8. Service Mode