Table of Contents
Advertisement
*3: This alarm is generated only once per cartridge. It will not be generated again for the same cartridge once this has been
generated.
*4: It can be changed in the following service mode (Lv. 1).
COPIER > OPTION > DSPLY-SW > T-LW-BK
COPIER > OPTION > DSPLY-SW > TNR-WARN
Alarm Code
• Prior delivery alarm (K)
10-0020
• Toner Bottle (Bk) empty alarm
10-0404
• New Toner Bottle replacement detection (Bk)
10-0100 ( 00000071 )
• Unidentified Toner Bottle replacement detection (Bk)
10-0100 ( 00000181 )
• Toner memory detection error (Bk)
10-0094
Service Mode
• To set the timing to generate prior delivery alarm:
COPIER > OPTION > FNC-SW > T-DLV-BK
• To set the timing to display the message:
COPIER > OPTION > DSPLY-SW > T-LW-BK
• Display/hide of the message display
COPIER > OPTION > DSPLY-SW > TNR-WARN
Transfer
■ Overview
The transfer block consists of 2 steps, and transfers the toner image on the Photosensitive Drum surface to the paper.
No.
1
Photosensitive Drum
2
Transfer Roller
3
Pre-transfer Guide
4
Static Eliminator
5
Preprinting Paper
6
Pre-transfer Guide Bias
7
Transfer Bias
[1]
[3]
[6]
[4]
[2]
[5]
Name
48
2. Technology
[8]
[7]
Advertisement
Table of Contents
