Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > NETWORK
SPDALDEL
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
NCONF-SW
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Supplement/Memo
AFS-JOB
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
AFC-EVNT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
2
Initialization of SPD value
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To initialize all the SPD values that are under management.
SPD values can be initialized without clearing SRAM.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
SPD: Database that manages SA (Security Association).
SPD value is managed when IPSec Board is used. Normally, SRAM needs to be cleared in the
case of mismatch in SPD value.
1
ON/OFF of Network Configurator function
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set ON/OFF of Network Configurator function.
If the user does not use the function, select OFF to prevent remote attack through network.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
1
Network Configurator function is a function to be used for communication with NetSpot Device
Installer, etc., and the network setting can be changed from the remote.
1
Set of FAX server job reception port
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the reception port of the fax server to which a fax client sends jobs.
When changing the job reception port of the fax server
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
20317
COPIER> OPTION> NETWORK> AFC-EVNT
1
Set of FAX client event reception port
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the event notification reception port of a fax client.
When changing the event notification reception port of a fax client
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 65535
29400
COPIER> OPTION> NETWORK> AFS-JOB
472
8. Service Mode
Advertisement
Table of Contents
