Table of Contents
Advertisement
COPIER (Service mode for printer) > ADJUST (Adjustment mode) > MISC
ACS-EN2
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-CNT2
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
SEG-ADJ3
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
K-ADJ3
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ACS-ADJ3
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set ACS mode jdgmt area in DADF mode
To set the judgment area in ACS mode at DADF reading.
As the greater value is set, the judgment area is widened.
When adjusting the judgment area in ACS mode at DADF reading
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
1
Set ACS jdgmt pixel count area in DADF
To set the area which counts the pixel to judge the color presence in ACS mode at DADF reading.
As the greater value is set, the judgment area is widened.
When adjusting the area which counts the pixel to judge the color presence in ACS mode at DADF
reading
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-2 to 2
0
Set criteria for text/photo: back side
To set the judgment level of text/photo original in Text/Photo/Map mode (back side at duplex
reading with 1 path).
As the value is increased, the original tends to be detected as a photo document, and as the value
is decreased, the original tends to be detected as a text document.
When adjusting the classification level of text and photo in Text/Photo/Map mode (back side at
duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-4 to 4
0
Set criteria for black text: back side
To set the judgment level of black characters at text processing (back side at duplex reading with
1 path).
As the value is increased, the text tends to be detected as black.
When preferring the text to be judged as black (back side at duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-3 to 3
0
Set ACS B&W/color jdgmt stdrd:back side
To set the judgment level of B&W/color original in ACS mode (back side at duplex reading with 1
path).
As the value is increased, the original tends to be detected as a B&W document, and as the value
is decreased, the original tends to be detected as a color document.
When adjusting the color detection level in ACS mode (back side at duplex reading with 1 path)
1) Enter the setting value (switch negative/positive by -/+ key) and press OK key.
2) Turn OFF/ON the main power switch.
-3 to 3
0
426
8. Service Mode
Advertisement
Table of Contents
