Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
MB-CCV
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CONTROL
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
CNT-DISP
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PH-D-SEL
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
COPY-JOB
1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Control card usage limit for Mail Box
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To restrict use of control card for Mail Box.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Unlimited, 1: Limited
1
Charge setting of PDL job
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set charge count transmission of PDL job to the connecting charging management device (Coin
Manager or non-Canon-made control card).
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: No charge, 1: Charge
0
COPIER> OPTION> ACC> COIN
Display/hide of serial No.
To set whether to display or hide the serial No. on the Counter Check screen.
When setting to display/hide serial No. on the Counter Check screen.
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Set dither matrix at screen processing
To set the screen dither matrix to be used for halftoning processing at the time of copy output,
B&W Inbox scan output and B&W SEND output.
When moire occurs frequently, set to 1.
When the setting is changed, the number of PG lines to be output at PASCAL control is also
changed.
When moire frequently occurs at the time of copy output, B&W Inbox scan output and B&W SEND
output. Especially when moire frequently occurs in the halftone density area of photo and image
gradation areas
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: 134 lines, 1: 141 lines
0
COPIER> OPTION> USER> PH-D-SL2
Setting of copy job reservation
To set to enable/disable copy job reservation when the Card Reader/Coin Manager is used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Enabled, 1: Disabled
0
487
8. Service Mode
Advertisement
Table of Contents
