Canon imageRUNNER ADVANCE 715 series Service Manual page 416

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
OFST-BW0 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
OFST-BW1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
OFST-BW2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
Adj CIS-ch0 offset:front,B&W mode,600dpi
To adjust the offset value (black level)
of the Scanner Unit (for front side)
on channel 0 in Black & White mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (for front side)
Enter the setting value, and then press OK key.
When replacing the CIS, rewrite the value on the label by displaying this item after executing
COPIER>FUNCTION>CCD>CL-AGC.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS-ch1 offset:front,B&W mode,600dpi
To adjust the offset value (black level)
of the Scanner Unit (for front side)
on channel 1 in Black & White mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (for front side)
Enter the setting value, and then press OK key.
When replacing the CIS, rewrite the value on the label by displaying this item after executing
COPIER>FUNCTION>CCD>CL-AGC.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS-ch2 offset:front,B&W mode,600dpi
To adjust the offset value (black level)
of the Scanner Unit (for front side)
on channel 2 in Black & White mode with 600 dpi.
The value is updated by executing CL-AGC.
- When clearing the Reader-related RAM data/replacing the SATA Flash PCB
- When replacing the Scanner Unit (for front side)
Enter the setting value, and then press OK key.
When replacing the CIS, rewrite the value on the label by displaying this item after executing
COPIER>FUNCTION>CCD>CL-AGC.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
406
8. Service Mode