Table of Contents
Advertisement
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-R
RD-SHPOS
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
SCAN-ON
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
■ MISC-P
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > MISC-P
P-PRINT
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
HIST-PRT
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
TRS-DATA
Detail
Use Case
Adj/Set/Operate Method
Additional Functions
Mode
2
Moving to Reader Scanner Unit fix pstn
To move the Reader Scanner Unit to the position where it is secured in when moving.
When moving the Reader after installation, the Reader Scanner Unit may move and get damage.
By moving the Scanner Unit to the specified position and securing it in place with a screw before
moving, damage can be prevented.
When moving the Reader after installation
Select the item, and then press OK key.
Be sure to move the Scanner Unit to the fixing position and secure it in place with a screw when
moving the Reader after installation. Otherwise, the Scanner Unit may get damage.
During operation: ACTIVE, When operation finished normally: OK!
1
Execution of copyboard reading operation
To execute the reading operation with the Copyboard.
When checking the operation of the motor of the Reader
Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
1
Output of service mode setting values
To output the service mode setting values.
Text data is saved in HDD as a file (P-PRINT-RPT.TXT).
Before executing the CLEAR service mode, etc.
Select the item, and then press OK key.
Be sure to use A4/LTR size plain paper/recycled paper.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> MISC-P> RPT-FILE
1
Output of jam and error logs
To output the jam log and error log.
Text data is saved in HDD as a file (HIST-PRT-RPT.TXT).
When outputting the jam/error log
Select the item, and then press OK key.
Be sure to use A4/LTR size plain paper/recycled paper.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> MISC-P> RPT-FILE
2
Moving memory reception data to Inbox
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To move the data received in memory to Inbox.
When moving the data received in memory to Inbox
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Fax/I-Fax Inbox> Memory RX Inbox
440
8. Service Mode
Advertisement
Table of Contents
