Table of Contents
Advertisement
COPIER (Service mode for printer) > OPTION (Specification setting mode) > USER
JA-PULL
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-PDLB
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-JOBK
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-JDF
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JA-RUI
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Setting of network scan: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the network scan when iW SAM is enabled.
When 1 is set, the network scan is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Set of printer driver multi box save:SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether a document can be simultaneously saved to multiple Inboxes from the printer driver
at the time of iW SAM.
When 1 is set, a document can be saved to multiple Inboxes from the printer driver.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of job merge allowance:SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether merging jobs is allowed when iW SAM is enabled.
When 1 is set, jobs can be merged.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of JDF: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the use of JDF when iW SAM is enabled.
When 1 is set, JDF can be used.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
Setting of Inbox document access: SAM
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the Inbox document access from remote UI at the time of iW SAM
When 1 is set, accessing to the Inbox document from remote UI is enabled.
When the operation restriction is cleared at the time of iW SAM
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Disabled, 1: Enabled
0
500
8. Service Mode
Advertisement
Table of Contents
