Canon imageRUNNER ADVANCE 715 series Service Manual page 383

COPIER (Service mode for printer) > DISPLAY (State display mode) > ACC-STS
SORTER 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
DECK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
CARD 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
RAM 1
Detail
Use Case
Adj/Set/Operate Method
Unit
Amount of Change per
Unit
COINROBO 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
HDD 1
Detail
Use Case
Adj/Set/Operate Method
Connect state of Finisher-related option
To display the connection state of Finisher-related options.
When checking the connection of Finisher-related options
N/A (Display only)
Left column (connection state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle, without Folding Unit
3: With Saddle and Inserter, without Folding Unit
4: With Saddle and Folding Unit, without Inserter
5: With Saddle, Inserter and Folding Unit
Right column (connection state of Finisher-belonged Puncher): 0 to 4
0: No hole, 1: 2-hole, 2/4-hole switching, 2: 3-hole, 2/3-hole, 2/3-hole switching, 3: 4-hole, 4: 4-
hole (SW)
Display of Paper Deck connection state
To display the connecting state of the Paper Deck.
When checking the connection between the machine and the Paper Decks
N/A (Display only)
0 to 5
0: Not connected, 1: Connected, 2 to 4: Not used, 5: Multi-purpose Tray only
Dspl of connection state of Card Reader
To display the connecting state of Card Reader.
When checking the connection between the machine and the Card Reader
N/A (Display only)
0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is not available.)
1: Card Reader is not connected, or card is inserted while the Card Reader is connected. (Copy
is available.)
Display of MNCON PCB memory capacity
To display the memory capacity of the Main Controller PCB.
When checking the memory capacity of the machine
N/A (Display only)
MB
1
Dspl of Coin Manager connection state
To display the connecting state of the Coin Manager.
When checking the connection between the machine and the Coin Manager
N/A (Display only)
0 to 1
0: Not connected, 1: Connected
Display of HDD model name
To display the model name of HDD.
When checking the model name of HDD used on the machine
N/A (Display only)
373
8. Service Mode